Users must assign discrete hinges to frame elements in order to model nonlinear behavior in frame element. Merely defining a nonlinear material properties does not activate nonlinear material response of frame elements, unless hinges are assigned to the frame elements. Nonlinear material stress-strain curve is used to determine the response of the hinges.

Key steps to modeling hinges

• Define hinge properties using the "Advanced Tab > Define > Section Properties > Hinge Properties" menu command.

• Assign hinges to frame elements using the "Advanced Tab > Assign > Frames > Hinges" menu command.

• Create a nonlinear load case and run the analysis.

• Use the "Home Tab > Display > More > Show Hinge Results" menu to plot hinge deformation against applied loading. Moment vs. plastic rotation is one such option.

See Also

• CSI Analysis Reference Manual (Frame Hinge Properties, page 131)

• Verification Example 1-026, available through "Orb (circular bridge icon) > Resources > Documentation > Show > Analysis Verification > Frames > 1-026 Moment and Shear Hinges"

• Habibullah, A., Pyle, S. (1998). Practical Three Dimensional Nonlinear Static Pushover Analysis , Computers and Structures, Inc., Berkeley, CA

Metadata

• Name: Hinge first steps (CSiBridge)

• Description: Basic introduction to hinge application in CSiBridge.

• Program: CSiBridge

• Program Version: na

• Model ID: na