Applying parametric variation to bridge width and girder spacing for bridge object with skewed abutments (steel I-girder bridge deck section)
- Ondrej
- Riaz Syed
On this page:
Overview - desired geometry
The purpose of this tutorial is to show how to generate bridge geometry shown in Figure 1.
Figure 1: Desired geometry
Modeling procedure
The procedure is described in the attached "analysis notes.pdf" file that can be previewed below:
Geometry generated by CSiBridge
The final geometry generated by CSiBridge is shown in Figure 2:
Figure 2: Generated geometry
Attachments
model C V18.0.1 linear variation with 6 girders.zip ... zipped CSiBridge V18.0.1 model file
analysis notes.pdf ... report describing the procedure
geometry.dxf ... DXF file with the desired geometry
See also
Metadata
Name: Applying parametric variation to bridge width and girder spacing for bridge object with skewed abutments (steel I-girder bridge deck section)
Description: Demonstration of how to apply parametric variation to the deck width and girder spacing of bridge object with skewed abutments.
Program: CSiBridge
Program Version: 18.0.1
Model ID: 581.1