/
Manual meshing
Manual meshing
Manual meshing may be generated as follows:
- Select Run > Automatic Slab Mesh, then increase the approximate maximum mesh size to a large enough value such that no automatic mesh is created.
- Draw null lines along slab edges, then replicate them in each direction.
- Select all, then select Edit > Edit Areas > Divide Quads At, and check Intersections with Selected Line Objects Only.
, multiple selections available,
Related content
Meshing FAQ
Meshing FAQ
More like this
Modeling techniques
Modeling techniques
More like this
Meshing
Meshing
More like this
Joint-pattern first steps
Joint-pattern first steps
More like this
Auto vs. Manual meshing
Auto vs. Manual meshing
More like this