Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

{{Tutorial

name = Influence-based moving load analysis

description = Basic description of procedure to setup influence-based moving load analysis.

keyword = moving load; influence-based

program = SAP2000

version = V12.0.1

status = in progress

type = first steps

id = na}}

Setting up influence-based moving load analysis involves the following steps:

  • Define Vehicle using "Define > Bridge Loads > Vehicles" menu command.
  • Define vehicle class using "Define > Bridge Loads > Vehicle Classes" menu command.
  • Define Lane using "Define > Bridge Loads > Lanes" menu command.
  • Define moving load case using "Define > Load Cases > Add New Load Case" menu command. Set the load case type to moving load and the vehicles and lanes assigned to that moving load:

See Also

  • CSI Analysis Reference Manual, chapter "Bridge Analysis", sections "Overview" and "Bridge Analysis Procedure"

Moving Load

  • No labels