{{Tutorial
...
Influence-based moving
...
...
keyword = moving load; influence-based
...
program = SAP2000
...
version = V12.0.1
...
status = in progress
...
type = first steps
...
id = na}}
Setting up influence-based moving load analysis involves the following stepsload analysis is initiated through the following process:
Define Vehicle
using "type through Define > Bridge Loads > Vehicles
" menu command.
Define vehicle class
using "through Define > Bridge Loads > Vehicle Classes
" menu command.
Define
Lane using "the lane through Define > Bridge Loads > Lanes
" menu command.
Define a moving-load case
using "through Define > Load Cases > Add New Load Case
" menu command. Set the load-case type to
moving load andMoving Load, then specify the vehicles and lanes assigned to
thatthis moving load, as shown in Figure 1:
Figure 1 - Load-case data
See Also
Influence-based moving-load analysis first steps (CSiBridge)
CSI Analysis Reference Manual ,
chapterChapter "
Bridge Analysis", sections "Overview" and "Bridge Analysis Procedure"
...
Moving-Load Analysis"
Metadata
Name: Influence-based moving-load analysis first steps
Description: Procedure for initiating influence-based moving-load analysis.
Program: SAP2000
Program Version: 12.1.0
Model ID: na