Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 9 Next »

 

Using SAP2000, response-spectrum curves may be generated from a user-defined time-history record through the following process:

  • Define the time-history function through Define > Functions > Time History Menu.
  • Define the time-history load case through Define > Load Cases > Add New Load Case.
  • Select a fixed joint, then display the ground-motion response-spectrum curves for that joint by selecting Display > Show Response Curves, as shown in Figure 1:

 

See Also

  • No labels

General-Topics | CSiBridge CSiCOL CSiPlant ETABS PERFORM-3D SAFE SAP2000 | Tutorials Test-Problems Documentation Licensing

Copyright © 2024 Computers and Structures, Inc. All rights reserved. | Powered by Atlassian