Simply supported beam P-δ

P-δ is a local effect associated with axial load on displacement relative to element chord extending between end nodes. Figure 1 illustrates the influence of P-δ on a simply supported beam. Here, a transverse distributed load ω correlates with elastic bending-stiffness properties K_E to induce vertical displacement δ. An additional flexural contribution comes from the relationship between this deformed configuration and axial load P. The geometric stiffness properties K_G which dictate this relationship are discussed further in Dr. Edward L. Wilson's text

Cantilevered column P-δ

Now, when observing P-δ effect on a cantilevered column, response is shown in Figure 2:

However, columns seldom displace with single curvature. More commonly, especially with multi-story-building analysis and design, columns deform according to a third-order (cubic) displacement pattern under double curvature. As shown in Figure 3, P-δ effect is much less pronounced because an inflection point intersects the element chord near midspan, previously where displacement from chord was greatest.

Cantilevered column P-∆

However, what is often of significance, given this loading condition and double-curvature displacement pattern, is P-∆ effect. Although displacement deviates from element chord much less, the lateral displacement associated with story drift is significant. With increasing levels of drift, gravity load has a greater effect on mechanical behavior, as shown in Figure 4. P-∆ effect should be implemented during design, whether static or dynamic, linear or nonlinear.

References

• Wilson, E. L. (2004). Static and Dynamic Analysis of Structures (4th ed.). Berkeley, CA: Computers and Structures, Inc.
  Available for purchase on the CSI Products >
  Unknown macro: {link-window} Books
  page