...
| Info |
|---|
This page is devoted to frequently asked questions (FAQ) related to cables. |
On this pace:
| Table of Contents |
|---|
Modeling
How are cables imported from AutoCAD?
...
Large Displacement should be included in analysis when cables are modeled using frame objects.
| Show if | ||
|---|---|---|
| ||
Related Incidents:
|
Why are the cables of my model returning nonzero moment values?
ANSWER: Objects intended to be cables would generate bending response when It is possible that the cables were modeled using straight frame objects. Frame objects generate a bending response. If moment values are returned, cables should be modeled as catenary elements by unchecking the Model Cable Using Straight Frame option on the Cable Geometry menu.
...
ANSWER: Once load is applied to the original geometry, a symmetric shape should result.
| Show if | ||
|---|---|---|
| ||
Related Incidents:
Question 1: How is initial cable length and geometry calculated when multiple point loads are applied? Answer 1: OPEN QUESTION |
Loading
Should I apply a load which represents initial cable conditions before running subsequent nonlinear analyses?
ANSWER: Yes, in most cases, it is a good practice to assign a load which represents initial cable conditions. This is done using the Cable Geometry menu. Initial cable tension is dependent upon initial geometry and applied loading. Given distributed loading on a single cable with fixed supports, the cable drawing tool can calculate this tension. Full analysis must be implemented for systems of cables, cables connected to flexible structures, and conditions in which additional loads are applied. The best approach depends on what information is known and how the structure is to be built. If cable length is known, a simple nonlinear analysis procedure should be sufficient. Otherwise, initial - geometry iteration or target-force loading may be necessary.
Once the initial shape and tension of a cable is determined, further analysis is necessary when additional loading is applied. Nonlinear analysis is also recommended. Video 16 of the SAP2000 Watch & Learn video series provides excellent instruction on this topic.
How can I display the wind load which is applied to cables?
...
ANSWER: Nonlinear analysis is necessary to generate meaningful results which concern cable behavior. Linear analysis may be performed, though cable stiffness values should be taken from a nonlinear static-analysis load case in which cables are subjected to all loading conditions, including self-weight, transverse, etc.
When a cable with slack is not subjected to any form of transverse loading, a negligible self-weight is imposed to enable the formulation. However, it is best to apply this self-weight load manually such that it is of realistic magnitude.
...