Versions Compared

Old Version 3

changes.mady.by.user Asif Habibullah

Saved on

compared with

New Version Current

changes.mady.by.user Ondrej

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

This page describes a tool that can be used to convert ETABS models into SAP2000 models, and vice versa.

On this page:

Table of Contents

Important Note

The ConnectSAP2000v21andETABSv18Launch.exe will only work with SAP2000 v21.1.0 or higher, and ETABS v18.0.0 or higher.

Overview

The

...

Connect SAP2000 and ETABS tool can be used to convert ETABS

...

models into SAP2000

...

models, and vice versa.

...

 In order to use this tool, the user must have both ETABS

...

and SAP2000

...

installed on the same system. Using the latest versions of all CSI products is recommended

...

. Both 32-bit and 64-bit versions are supported.

Usage

...

  1. Download and run the version of the ConnectSAP2000andETABSLaunch.exe that matches the versions of SAP2000 and ETABS you wish to use.
  2. Select an option, either “SAP2000 to ETABS”, or “ETABS to SAP2000”.
  3. Follow the instructions in the title of each of the subsequent “Open File” dialog boxes.
  4. First, you will select the program executable from which you are converting (either SAP2000.exe or ETABS.exe usually located in .../Program Files/Computers and Structures/[PROGRAM NAME]).
  5. Next, select the model file to be converted.
  6. Finally, select the program to which you are converting.
  7. The

...

  1. Connect SAP2000 and ETABS tool will launch the first program, open the model, then launch the second program and transfer model data.
  2. It will save the new model with the same name as the original.

 

Supported Data Transfer

Features Available SAP2000 → ETABS Available ETABS → SAP2000 
MaterialsYESYES

Frame Sections

YESYESLoad PatternsYESYESJoint CoordinatesYESYESObject ConnectivityYESYESPoint AssignmentsYESYESPoint Load AssignmentsYESYESFrame AssignmentsYESYES

Area Assignments

Yes

Yes

Area Load Assignments

Yes

  • Transfer Uniform, Temperature, and Wind Pressure types of load
  • Do not transfer Uniform to Frame type of load

Yes

  • Transfer Uniform, Temperature, and Wind Pressure types of load
  • Do not transfer Uniform to Frame type of load

Area Properties

Yes

Partial

Frame Assignments

Yes

Yes

Frame Sections

Yes

Yes

Link Assignments

Yes

Yes

Link Support Properties

Yes

Yes

Load Assignments

Yes

Yes

Load Patterns

Yes

Yes

Materials

Yes

Yes

Object Connectivity

Yes

Yes

Point Assignments

Yes

Yes

Point Coordinates

Yes

Yes

Download


Show if
groupeditors

Location of current and previous versions: \\fileserver\fromH\DEVEL\ConnectSAPandETABS