{live-template:Test Problem}

To simulate a two-span structure which is simply supported under dead load, and continuous under live load, a staged-construction load case is defined with five stages, outlined as follows:

• Stage 1: Add two frame objects, one for each span.

• Stage 2: Define frame end releases through Define > Named Property Sets > Frame Releases, then assign these moment releases to the start joint of the second span.
  
  Additional information is available in the Staged-construction tips and Staged-construction operations articles.

• Stage 3: Apply load to the structure. Response will be as though the system is simply supported.

• Stage 4: Fix the moment end releases which are applied in Stage 2.

• Stage 5: Apply additional load to the structure. Response will now be as though the system is continuous.

Structural The structural response is presented in Figure 1:

Image Modified

Figure 1 - Structural response

Attachments

• SAP2000 V12.0.1 model (zipped SDB file)

Metadata

• Name: Two-span girder simply-supported for DL and continuous for LL

• Description: Modeling demonstration for a two-span girder which is simply-supported for DL and continuous for LL.

• Program: SAP2000

• Program Version: 12.0.1

• Model ID: 130