| Wiki Markup |
|---|
\\
*DWG* (Drawing) files may be *imported into SAP2000* using the same procedure as that for DXF files. This procedure is described in the [Import DXF into SAP2000|sap2000:Import DXF into SAP2000] article, which may be applied to DWG files.
* The only difference aside from file format is the mapping between DWG entities and [SAP2000|sap2000:home] objects. Entities from the DWG file will convert into SAP2000 objects as described in the following table:
\\
|| || MAPPING content || ||
|| || DWG entity || SAP2000 object ||
| 1 | AcadPoint | [Point|kb:Joint] |
| 2 | AcadLine | [Line|kb:Frame] / [NLink|kb:Link] |
| 3 | Acad3DFace | [Area|kb:Shell] |
| 4 | AcadDb3DSolid | [Solid|kb:Solid] |
\\
{info}
*NOTE:* DWG Solid objects differ between import and export. For import, AcadDb3DSolid is useful for DWG files. For export, AcadPolyMesh is useful for obtaining object coordinates.
{info}
{hidden-content}
*NOTE:* DWG Solid import was available to SAP2000 V11.0.4, but is no longer available to V12 and V14.
{hidden-content}
{hidden-content}
*Related Email:*
* {email:from=uh|to=ok|date=7/28/2010|subject=Import of autocad DWG solids not available in SAP2000 V12 and V14|comment=|id=3702965}
*Related Incident:*
* {incident:no=25464|comment=Show the hidden content below after Incident 25464 is resolved.}
{hidden-content}
{hidden-content}
h1. Sample DWG files for import
For solid import, SAP2000 supports the AutoCAD2007 entities which follow:
* Box
* Wedge
* Pyramid (or frustum)
* Extrusion of 3DFace, which is possible for all 3DFace entities by creating legal shells with four nodes
The entities previously listed have been tested using the files which follow:
* RoundSolids.dwg
* RoundSolids2.dwg
* SolidImporttest.dwg
\\
h2. RoundSolids.dwg model
\\
!Figure 01.png|hspace=30px,width=800px!
\\
!Figure 02.png|hspace=30px,width=800px!
\\
The Extrude command converted AutoCAD 3DFace entities into solid objects. Objects were successfully imported into SAP2000 after performing the Rotate3D operation all solid entities.
\\
h2. RoundSolids2.dwg model
\\
!Figure 03.png|hspace=30px,width=800px!
\\
!Figure 04.png|hspace=30px,width=800px!
\\
The Extrude command converted AutoCAD 3DFace entities into solid objects.
\\
h2. SolidImporttest.dwg model
\\
!Figure 05.png|hspace=30px,width=800px!
\\
!Figure 06.png|hspace=30px,width=800px!
\\
AutoCAD 3dSolid entities, including the box, wedge, and pyramid, are imported into SAP2000.
\\
!Figure 07.png|hspace=30px,width=800px!
\\
!Figure 08.png|hspace=30px,width=800px!
\\
!Figure 09.png|hspace=30px,width=800px!
\\
!Figure 10.png|hspace=30px,width=800px!
\\
!Figure 11.png|hspace=30px,width=800px!
h1. Attachments
* [RoundSolids.dwg |Import DWG into SAP2000^RoundSolids.dwg]
* [RoundSolid2.dwg |Import DWG into SAP2000^RoundSolid2.dwg]
* [SolidImporttest.dwg |Import DWG into SAP2000^SolidImporttest.dwg]
{hidden-content}
h1. See Also
* [Export SAP2000 to DWG|sap2000:Export SAP2000 to DWG]| Info |
|---|
NOTE: While written for SAP2000, this article also applies to CSiBridge. |
Drawing (DWG) files may be imported from AutoCAD 2012 into SAP2000 using the procedure which follows:
Create and save a DWG model within AutoCAD. The example model we will use for this demonstration is shown in Figure 1:
Image Added
Figure 1 - DWG model for import into SAP2000
DWG entities should be coordinated with SAP2000 objects such that they import as follows:
| DWG entity | SAP2000 object | Color |
|---|
1 | Point | Joint | Cyan |
2 | Line | Frame | Yellow |
3 | Point | Link (one-point) | Cyan |
4 | Line | Link (two-point) | Green |
5 | 3D Face | Shell | Red |
6 | N/A | Solid | N/A |
| Show if |
|---|
|
NOTE: SAP2000 solid objects export to AutoCAD 2012 DWG as Polyface Mesh, and DXF as Polygon Mesh, but then 3D AutoCAD DWG entities (Polyface Mesh, Polygon Mesh, and 3D Solid) do not import into SAP2000 as solid objects. |
Within SAP2000, select File > Import > AutoCAD .dxf File, as shown in Figure 2:
Image Added
Figure 2 - Select the DXF Import feature
| Info |
|---|
NOTE: AutoCAD must be installed on the desktop to import and export between SAP2000 and DWG. This is because DWG files are in binary format, which must be read and written using the functions available through the AutoCAD API. |
Select DWG Files (*.DWG) from the scroll-down menu, then locate and double-click the DWG file for import into SAP2000, as shown in Figure 3:
Image Added
Figure 3 - Select DWG file for import
Select the Global Up Direction and the Units, then select OK, as shown in Figure 4:
Image Added
Figure 4 - Import specifications
Assign each type of SAP2000 object to a DWG layer (Figure 5). Each layer which occurs in the DWG file is listed in the scroll-down menu.
Image Added
Figure 5 - Layer specifications
Select OK, then the DWG file will import as a SAP2000 model, as shown in Figure 6:
Image Added
Figure 6 - DWG file as SAP2000 model
| Show if |
|---|
|
NOTE: DWG entities may not be imported into SAP2000 as solid objects. This feature was last available to SAP2000 V11.0.4. Related Emails: - Email Import of autocad DWG solids not available in SAP2000 V12 and V14: (uh → ok, 7/28/2010, ID 3702965)
Related Incidents: - Incident 25464: Show the hidden content below after Incident 25464 is resolved.
|
See Also