| Live template | ||
|---|---|---|
|
On this page:
| Table of Contents |
|---|
Model description
A two-span (10m each), continuous girder with solid cross section (0.1m by 0.6m) is modeled three times using frame, shell, and solid objects, as shown in Figure 1. The system is subjected to a unit moving load which travels the length of the structure. Section cuts are defined through the midspan of the second span. Section-cut forces are evaluated through influence-based moving-load analysis, which is run both with and without saving section cut forces.
...
- SAP2000 V14.1.0 model (zipped .SDB file)
Metadata
- Name: Saving section cuts during moving-load analysis
- Description: Sections cuts may be saved during moving-load analysis through this procedure.
- Program: SAP2000
- Program Version: 14.1.0
- Model ID: na