Page Comparison

{live-template:Tutorial}

Setting up influenceInfluence-based [moving load-load|kb:Moving-load analysis] analysis involvesis initiated through the following stepsprocess:

* Define [vehicle|kb:vehicle] type usingthrough "Define > Bridge Loads > Vehicles".
menu command.
* Define [vehicle class|kb:vehicle class] using " through Define > Bridge Loads > Vehicle Classes".
menu
command.
* Define the [lane|kb:Lane] usingthrough "Define > Bridge Loads > Lanes" menu.
command.
* Define a moving load-load [case|kb:Load case] usingthrough "Define > Load Cases > Add New Load Case" menu command. Set the load -case type to moving load andMoving Load, then add the vehicles and lanes assigned to thatthis moving load, as shown in Figure 1:

\\

!Load_case_data_SAP2000_V14.1.0_form.png|align=center,border=0!

{center-text}Figure 1 - Load-case data{center-text}


h1. See Also

* {new-tab-link:http://www.csiberkeley.com/}CSI{new-tab-link} [_Analysis Reference Manual_|doc:CSI Analysis Reference Manual] (Bridge Modeler, page 434)