Wiki Markup |
---|
{live-template:Tutorial} To model nonlinear frame behavior, frame hinges must be used. The nonlinear material behavior is only used to develop the moment rotation or other response curves for the hinges. h1. |
...
Key Steps to Setup a Model With Hinges |
...
* Define hinge properties using "Define > Section Properties > Hinge Properties" menu command. |
...
* Assign the hinges to the frame elements in the model by using Assign > Frame > Hinges menu command. |
...
* Create a nonlinear load case and run the analysis. |
...
* Use "Display > Show Hinge Results" menu command to plot the deformation of the hinges vs. the applied loads, such as plastic rotation of the hinge vs. moment. h1. |
...
See Also |
...
* CSI Analysis Reference Manual, chapter "Frame Hinge Properties" |
...
* Verification Example 1-026 (Frame - Moment and Shear Hinges), available from "Help > Documentation > Analysis Verification > Frames > 1-026 Moment and Shear Hinges". |
...
* Ashraf Habibullah, Stephen Pyle: [Practical Three Dimensional Nonlinear Static Pushover Analysis|http://www.csiberkeley.com/Tech_Info/Pushover%20paper.pdf] \- this technical paper describes the use of hinges for pushover analysis; it is available from [http://csiberkeley.com/support_technical_papers.html] |