A line constraint, also known as an edge constraint, may be applied to the edge of a shell or solid object. When applied along an edge, the line constraint will constrain all interconnecting objects to the joints selected. These joints will then displace, along those DOF selected, as a function of interpolation between the two master joints which govern constraint behavior.
| Info |
|---|
NOTE: Slight displacement discontinuity should be expected along any edge constraint. This discontinuity is sufficiently small relative to other deformations. |
...
An example edge constraint is shown in Figure 1:
Figure 1 - Edge constraint along shell element
Here, two edge constraints are applied at each end of a shell object which simulates the span of a bridge deck. Each of the four edge constraints has a master joint at either end, and a dependent joint at the intermediate-column intersection. If the joints circled in Figure 1 are numbered, from left to right, 1, 2, 3, 4, 5, then joint 2 is governed by masters 1 and 3, and joint 4 is governed by masters 3 and 5. Given this edge-constraint condition, each dependent-joint displacement is then interpolated from the displacement of the two master joints.
...