Versions Compared

Old Version 26

changes.mady.by.user Jessica Napier

Saved on

compared with

New Version 27

changes.mady.by.user Ondrej

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Info

This page is devoted to frequently asked questions (FAQ) related to numerical problems.

  On this page:

Table of Contents


What does the Lost Accuracy warning message indicate, and how is it resolved?

...

Answer: Lost accuracy applies to the stiffness matrix and its values during numerical solution. Since stiffness governs the relationship between force and displacement, lost accuracy will affect both of these response measures.


Show if
groupeditors

VERIFY

I received a body-constraint lost-accuracy warning message. How is this calculated?

Answer: Body and other rigid constraints create an internal master node which governs the nodes assigned to the constraint. These master nodes become part of the system of equations while the constrained nodes do not. When lost accuracy occurs within the constraint, it is reported for the master node, and not the individual components.


Show if
groupeditors

What causes the numerical problem Diagonal < 0, and how is it resolved?

OPEN QUESTION

Possible causes:

  • For linear analysis, Diagonal < 0 could result from an , in which constrained points are not exactly on the edge.
  • See 9/2/2010 email from fs, ID 3705068
  • For analysis, when effect is considered, negative terms may occur on the diagonal of the stiffness matrix at the onset of .
  • See Incident 27490 - example of Diagonal < 0 numerical problem.

What is the difference between equation-assembly and equation-solution numerical problems?

OPEN QUESTION