Page Comparison

...

On most client machines, this port is usually opened by default unless blocked due to firewall settings or internet security software. Any CSI product that is installed and successfully run with a network license on a client machine, confirms that the UDP Port 5093 is open on the client machine and will not require the port to be opened again.  

CREATE A NEW INBOUND & OUTBOUND RULE:  

1. Under Control Panel > System & Security > Windows Firewall > Advance Settings

   

2. Create a new Inbound Rule and new Outbound Rule
    

   1. These rules will be:
      1. a Port rule
      2. for all programs
      3. UDP port
      4. specific local port 5093
      5. allow the connection
      6. rule applies to all
3. Rule can be named anything but it is advisable to label the rule accordingly for easy reference later.

...