Page Comparison

{live-template:Test Problem}

\\

This test problem demonstrates thetutorial demonstrates [SAP2000|sap2000:home] *insertion-point* and end-offset and insertion-point features of [SAP2000|sap2000:home], and their associated effectsapplication. Associated effects, including those of *transform stiffness*, are also presented.


h1. Hand calculations

\\

{viewpdf:name=Hand calcs.pdf}

h1. Screenshots

The visuals which follow illustrate the modeling and performance of two systems, one whichwith follows default settings bywhich transformingtransform stiffness to account for insertion-point offset, as compared toand one which does not transform stiffness. 

\\

!End_offsets_transform_stiffness_test_problem_1_-_geometry.png|align=center,border=0!

{center-text}Figure 1 - Geometry{center-text}

\\

!End_offsets_transform_stiffness_test_problem_1_-_extruded_geometry.png|align=center,border=0!

{center-text}Figure 2 - Extruded geometry{center-text}

\\

!End_offsets_transform_stiffness_test_problem_1_-_deflections.png|align=center,border=0!

{center-text}Figure 3 - Deflections{center-text}

\\

!End_offsets_transform_stiffness_test_problem_1_axial_forces.png|align=center,border=0!

{center-text}Figure 4 - Axial forces{center-text}

\\

!End_offsets_transform_stiffness_test_problem_1_moment_diagrams.png|align=center,border=0!

{center-text}Figure 5 - Moment{center-text}


h1. Attachments

* [Hand calculations |Insertion point and transform stiffness^Hand calcs.pdf] (PDF file)
* [SAP2000 Model |Insertion point and transform stiffness^SAP2000 V12.0.1 model.zip] (zipped SDB file)