Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Wiki Markup
{live-template:Test Problem}

\\

This test problem demonstrates the end-offset offsets and insertion -point features of SAP2000. Please refer to the screenshots below[SAP2000|sap2000:home], and attachedtheir hand calculations for additional information.

{on-this-page}associated effects.


h1. Hand Previewcalculations
hand
calculations\\

{viewpdf:name=Hand calcs.pdf}

h1. Screenshots

The visuals which follow illustrate the modeling and performance of two systems, one which follows default settings by transforming stiffness to account for insertion-point offset, as compared to one which does not transform stiffness. 

\\

!End_offsets_transform_stiffness_test_problem_1_-_geometry.png|align=center,border=0!

{center-text}Figure 1 - Geometry{center-text}

\\

!End_offsets_transform_stiffness_test_problem_1_-_extruded_geometry.png|align=center,border=0!

{center-text}Figure 2 - Extruded geometry{center-text}

\\

!End_offsets_transform_stiffness_test_problem_1_-_deflections.png|align=center,border=0!

{center-text}Figure 3 - Deflections{center-text}

\\

!End_offsets_transform_stiffness_test_problem_1_axial_forces.png|align=center,border=0!

{center-text}Figure 4 - Axial forces{center-text}

\\

!End_offsets_transform_stiffness_test_problem_1_moment_diagrams.png|align=center,border=0!

{center-text}Figure 5 - Moment{center-text}


h1. Attachments

* [Hand calculations |Insertion point and transform stiffness^Hand calcs.pdf] (PDF format, 881 kBfile)
* [SAP2000 SDB File V12.0.1Model |Insertion point and transform stiffness^SAP2000 V12.0.1 model.zip] (Zippedzipped SDB file, 11 kB)